Atm T3 Trunk Interface (Bni-T3, Lm-3T3) - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 31 BPX Node Specifications

ATM T3 Trunk Interface (BNI-T3, LM-3T3)

Line Rate:
Line Code:
Signal Level:
Framing Format:
Protocol:
ATM Cell Rate:
Alarms Sent:
Alarms Received:
Line Errors Counted:
Jitter:
Connector:
Recommended Cable
Lengths:
Indicators:
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
44.736 Mbps 20 ppm, asynchronous.
B3ZS.
DSX-3.
C-bit parity is monitored. No other framing or control bits in the
DS3 frame are either altered or monitored.
Physical Layer Convergence Protocol per AT&T Publication
TA-TSY-000772 and 000773.
96,000 cells/sec.
Remote.
AIS.
Loss of Signal.
Remote.
Loss of Framing.
BPV.
Parity Bit Errors.
Meets ACCUNET T45 specification (Pub 54014).
75 ohm BNC.
450 feet (150 m.) to a DS3 crossconnect.
Card status.
Port status.
Cisco BPX 8600 Series Installation and Configuration
ATM T3 Trunk Interface (BNI-T3, LM-3T3)
31-5