Chapter 21 Configuring Atm Connections; Atm Connection Services - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Configuring ATM Connections
This chapter explains how to establish ATM connection services by adding ATM connections between
ATM service interface ports in the network using ATM standard UNI 3.1 and Traffic Management 4.0:
•
•
•
•
•
•
•
•
•
•

ATM Connection Services

You establish ATM connection services by adding ATM connections between ATM service interface
ports in the network.
•
•
Frame relay to ATM network interworking connections are supported between either BXM cards to:
•
•
•
•
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
ATM Connection Services
Basic ATM Connection Procedure
Traffic Management Overview
ATM Connection Requirements
ATM Connection Flow
rt-VBR and nrt-VBR Connections
ATM Connection Configuration
Traffic Policing Examples
Local Management Interface and Integrated Local Management Interface Parameters
ATM Command List
on the BPX switch through cards configured for port (service access) operation:
– BXM-T3/E3
BXM-155 (OC-3)
–
– BXM-622 (OC-12) cards
or on the MGX 8220 through the AUSM card for the MGX 8220
the IGX
the MGX 8220
the MGX 8800
or to FRSM cards on the MGX 8220
C H A P T E R
Cisco BPX 8600 Series Installation and Configuration
21
21-1