Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 37

Preface
This manual is the primary Cisco guide to installing and configuring the BPX 8600 Series wide-area
switches. It provides:
•
•
•
•
•
•
•
The 8600 series of Broadband Packet Exchange switches include:
•
•
•
•
Instructions for configuring MPLS on BPX switches, see the Cisco MPLS Controller Software
Configuration Guide.
Instructions for configuring PNNI on BPX switches, see the Cisco SES PNNI Controller Software
Configuration Guide.
All terms are defined in the Glossary.
Refer to current Release Notes for additional supported features.
Documentation CD-ROM
Cisco documentation and additional literature are available in the CD-ROM package that ships with
your product. Because the Documentation CD-ROM is updated monthly, it might be more current than
printed documentation.
To order additional copies of the Documentation CD-ROM, contact your local sales representative or
call Cisco Customer Service. The CD-ROM package is available as a single package or as an annual
subscription.
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Description and specifications of the switch hardware, chassis, cards, cables, and peripherals
Description of WAN switch software
Procedures for the installation of the switch, cards, cables, control terminals
Procedures for initial startup.
Procedures for configuring the BPX cards
Procedures for configuring lines and trunks
Procedures for provisioning (making ocnnections to your network).
BPX 8620 wide-area switch
BPX 8650 IP + ATM switch
BPX 8680 universal service switch
BPX 8680-IP (BPX+MGX8800+7204LSC)
Cisco BPX 8600 Series Installation and Configuration
xxxv