Trunk Mode; Technical Specifications; Physical Layer - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Technical Specifications

Trunk Mode

Compliant to Bellcore GR-253-CORE
Alarms:
•
•
•
•
•
•
•
Performance Monitoring:
•
•
•
•
•
•
•
Statistics:
Process Monitoring for ATM Header Cell Processing
•
Miscellaneous ATM Layer Statistics
•
•
•
•
Technical Specifications

Physical Layer

•
•
•
Cisco BPX 8600 Series Installation and Configuration
5-30
Loss Of Signal (LOS)
Loss Of Pointer (LOP)
Loss Of Frame (LOF)
Loss Of Cell delineation (LOC)
Alarm Indication Signal (AIS)
Remote Defect Indication (RDI)
Alarm Integration Up/down Count
Performance monitoring provided for Line, Section and Path
Bit Interleaved Parity (BIP) error detection
Far End Block Error (FEBE) count
Unavailable Seconds (UAS)
Errored Seconds (ES)
Severely Errored Seconds (SES)
Header Error Checksum (HCS) monitoring
Cells discarded due to Header Errors (LCN mismatch)
Number of cell arrivals from port
Number of cell arrivals with CLP = 1
Number of cells transmitted to port
Number of cells transmitted with CLP = 1
Trunk or port (access) interface mode.
Compliant to SONET standards.
*Bellcore GR-253-CORE, TR-TSY-000020
–
– *ANSI T1.105, T1E1.2/93-020RA
Compliant to SDH standards.
Chapter 5 BXM Card Sets: T3/E3, 155, and 622
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001