Cisco BPX-BXM-155-8DX Installation And Configuration Manual page 422

Command Line Interface Examples
pubsbpx1
Local
Channel
2.2.16.16
2.3.66.66
Last Command: addcon 2.2.16.16 pubsbpx1 2.3.66.66 rt-VBR * * * * * * *
Next Command:
An example of the cnfcon command for a rt-VBR connection 2.2.16.16.
pubsbpx1
Conn:
PCR(0+1)
50/50
1000/1000
This Command: cnfcon 2.2.16.16
PCR(0+1) [50/50]:
An example of the addcon command for an ABR connection follows. In this case, the choice to accept
the default parameters was not accepted, and individual parameters were configured for a connection
using ABR standard VSVD flow control.
Cisco BPX 8600 Series Installation and Configuration
24-10
TN silves
Remote
NodeName
pubsbpx1
pubsbpx1
TN silves
2.2.16.16 pubsbpx1
% Util
100/100 250000/250000
MBS Policing
3
BPX 8620 9.3 March 2 2000 14:05 PDT
Remote
Channel State
2.3.66.66 Ok
2.2.16.16 Ok
BPX 8620 9.3 March 2 2000 14:06 PDT
2.3.66.66
CDVT(0+1) AAL5 FBTC
n
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Chapter 24 Configuring BXM Virtual Circuits
Route
Type Avoid COS O
rt-vbr
rt-vbr
rt-vbr Status:OK
SCR
50/50