Chapter 5
BXM Card Sets: T3/E3, 155, and 622
BXM Backcard Connectors
The two backcards are connected together by a BPX Redundant Backplane which mates with the BPX
Midplane. The connectors are the same as those for the standard backcards. An APS backcard is shown
in (Figure 5-10, and the BPX Redundant Backplane is shown in (Figure 5-11).
Figure 5-5
SMF-622-2, SMFLR-622-2, and SMFXLR-622-2 Back Card
Cisco BPX 8600 Series Installation and Configuration
5-15
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001