Line Module For The Alarm/Status Monitor Card; Table 3-5 Lm-Asm Face Plate Connectors - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Alarm/Status Monitor Card

Line Module for the Alarm/Status Monitor Card

The Line Module for the Alarm/Status Monitor Card (LM-ASM) is a back card to the ASM card. It
provides a simple connector panel for interfacing to your alarm system. It is not required for system and
ASM operation.
The LM-ASM backcard must be installed in back slot number 15.
Figure 3-6 illustrates the face plate of the LM-ASM which contains a single subminiature connector
(see Table 3-5). The Alarm Relay connector provides dry-closure (no voltage) relay contact outputs.
Table 3-5
No
1
Cisco BPX 8600 Series Installation and Configuration
3-14
LM-ASM Face Plate Connectors
Connector/
Indicator Function
ALARM A DB15 connector for alarm relay outputs. Refer to Chapter 3 or
RELAYS Appendix C for pinouts.
Chapter 3 BPX Switch Common Core Components
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001