Table of Contents
Advertisement
LEDs
LED
Output OK
Fault
ATTN (Attention)
1
Fan Tray LEDs
The fan tray LEDs are located on the top portion of the module.
Figure 41: Fan Tray LEDs
1
2
Color
Green
Flashing Green
Off
Red
Flashing red
Flashing blue
Off
Sleep mode is not applicable for DC-60 power module.
FC STS (Status)
FT STS (Status)
Status
Output power is enabled.
Output power in power limit, or in overcurrent
condition, or is in the sleep-mode.
Output disabled, or no inputs present, or firmware
upgrade in-progress.
Output voltage is out of the specified range, or a fan
has failed, or internal fault.
Firmware upgrade in-progress.
User configured action config hw-module attention-led
location 0/PTx/PMy.
No user configuration is set.
3
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Fan Tray LEDs
1
ATTN (Attention)
65
Advertisement
Table of Contents
