Virtual Trunks Commands Common To Bxm And Uxm; Table 25-9 Virtual Trunk Commands Common To Bxm And Uxm (Igx) - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Command Overview
With Release 9.2, the BPX statistics organization separates logical and physical trunk statistics. This is
also the method used on the UXM card on the IGX 8400 series switches.

Virtual Trunks Commands Common to BXM and UXM

The following commands are available on both the IGX and the BPX and have the same results. Refer
to the IGX 8xxx Series documentation for information the IGX and UXM.
The entries in Table 25-9 that are marked with a [*} are configured on a logical trunk basis, but
automatically affect all trunks on the port when a physical option is changed. For example, if the line
framing is changed on a virtual trunk, all virtual trunks on the port are automatically updated to have
the modified framing.

Table 25-9 Virtual Trunk Commands Common to BXM and UXM (IGX)

Command
addtrk
ckrtrkerrs
clrtrkstats
clrphyslnerrs
cnflnalm
cnftrk
cnftrkparm
cnftrkstats
cnfphyslnstats
deltrk
dntrk
dsplogtrk
dspphyslnstatcnf
dspphyslnstathist
dsptrkcnf
dsptrkcons
dsptrkerrs
dsptrks
dsptrkstatcnf
dsptrkstathist
dsptrkstats
dsptrkutl
prtphyslnerrs
prttrkerrs
Cisco BPX 8600 Series Installation and Configuration
25-22
Description
adds a trunk to the network
clears the trunk errors for a logical trunk
clears the summary trunk statistics for a logical trunk
clears trunk errors for a physical line
configures the statistical alarm thresholds for trunks and ports (affects
all trunks on node)
configures a logical trunk [*]
configures the trunk parameters of a logical trunk [*]
configures the interval statistics collection for a logical trunk
configures the interval statistics for a physical line
deletes a trunk from the network
downs a trunk
displays the logical trunk information
displays the statistics configuration for a physical line
displays the statistics collection result for a physical line
displays the trunk configuration
displays the number of connections routed over a trunk
displays the trunk errors for a logical trunk
displays the upped/added trunks
displays the configured statistics collection for a trunk
displays the statistics collection results for a trunk
displays the summary trunk statistics for a trunk
displays the utilization/traffic for a logical trunk
print the trunk errors for a physical line
prints the trunk errors for a logical trunk
Chapter 25 Configuring BXM Virtual Trunks
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001