Chapter 6 Installation Overview; Summary: Installation Procedure - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Installation Overview
This chapter is an overview of the configuration procedures in this manual:
•
•
•
The installation tasks introduced here are explained in detail in subsequent chapters.
For a description of the commands used to initially set up a BPX switch, refer to the Cisco WAN Switch
Command Reference and Cisco WAN Switch SuperUser Command Reference.
For additional information on network management and the graphical user interface recommended for
configuring and provisioning, refer to the Cisco WAN Manager manual.

Summary: Installation Procedure

Step 1 Safety
Site Preparation
Step 2
Step 3 Unpacking
Installing shelf in cabinet or rack
Step 4
Installing a Cisco 7200 or 7500 router on a BPX 8650
Step 5
Step 6 Optional Cable Management Tray
Step 7 Verifying 9.6 or 19.2 Gbps Backplane
Upgrading to BCC-4 Cards
Step 8
Installing APS Redundant Frame Assembly and Backcards
Step 9
Step 10 Making T3 or E3 Connections
Making a BXM OC3 or OC12 Connection
Step 11
Step 12 Making a BXM T3/E3 Connection
Setting up the BME OC-12 Port Loop
Step 13
Step 14 Alarm Output Connections
Attaching Peripherals
Step 15
Step 16 LAN Connection for the Network Management Station
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Summary: Installation Procedure
Installation Sequence Flow
Configuration: Lines, Trunks, and Connection
C H A P T E R
Cisco BPX 8600 Series Installation and Configuration
6
6-1