Making A Bxm T3/E3 Connection; Figure 14-3 Connecting Y-Cables To An Oc-3-Smf Backcard - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Chapter 14 Connecting Cables

Making a BXM T3/E3 Connection

Figure 14-3 Connecting Y-Cables to an OC-3-SMF Backcard

Making a BXM T3/E3 Connection
Each T3/E3 line module provides ports with both a transmit and receiver connector for each port. The
backcards can provide 4, 8, or 12 ports.
Figure 14-4 shows a typical T3/E3 cable connector that connects to the BXM T3/E3 cards.
Cisco BPX 8600 Series Installation and Configuration
14-6
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001