Figure 11-5 Securing An Ac Power Supply Tray, 19.86 Inch Rear Rail Setback - Cisco BPX-BXM-155-8DX Installation And Configuration Manual

Installing an AC Power Supply Tray

Figure 11-5 Securing an AC Power Supply Tray, 19.86 inch Rear Rail Setback

Step 9 Connect and secure a power supply interconnect cable (Cable A in Figure 11-6) between the primary
AC Power Supply and the BPX switch backplane power connector.
Step 10 Connect and secure a second power supply interconnect cable (Cable B in Figure 11-6) between the
redundant AC Power Supply and the BPX switch backplane power connector.
Remove the temporary support bracket and spacer bracket from the front of the cabinet
Step 11
Cisco BPX 8600 Series Installation and Configuration
11-6
Chapter 11
Release 9.3.0, Part Number 78-10674-01 Rev. D0, July 2001
Installing the AC Shelf