Mixer Input - Korg M3 Parameter Manual

Combination mode
Timbre Volume:
MIX VOLUMES sliders 1 (9)...8 (16)
These sliders adjust the volume level of the Timbres.
Timbre Volume
This controls the volume of each timbre.
132

Mixer Input

[000...127]
0–8d
Mixer Input lets you adjust the volume and switch the Play/
Mute and Solo On/Off status of the four audio inputs
Analog Input 1, 2 and S/P DIF IN L, R
For example on stage, you could use this page screen as a
submixer to control the output of other sound modules for
output together with the M3-M's own sounds.
FireWire L and R can be used if the EXB-FW option is
installed.
Other Audio Input settings
Each audio input can be assigned to up to three busses:
• An Output/IFX Bus
• An FX Control Bus
• An AUX Bus
You can set up these bus assignments on the P0: Play–
Sampling/Audio In page. For more information, please see
"0–7: Sampling/Audio In" on page 8.
0–8d: Mixer Input
Use/Edit Global Setup
Programs can use the single, Global audio input mixer
setup, or can instead have their own custom settings.
On (checked): The Global P0: Basic Setup– Audio page
settings for Analog Input 1, 2, S/P DIF L, R, FireWire L and
R (if the EXB-FW is installed) will be used.
If you switch from a combination (or program or song) for
which Use/Edit Global Setup is on to another combination
(or program or song), the same Audio Input settings will be
used.
Also, any edits made on this page will affect the Global
setting, along with any other Programs, Combinations, or
Songs which use the Global setting.
Off (unchecked): Turn Use/Edit Global Setup Off if you
want to use the Analog Input 1, 2, S/P DIF L, R, FireWire L
and R (if the EXB-FW is installed) settings made
individually for each combination (or program or song).
Use this setting if you want to preserve specific mixer
settings for each combination, if you want to use unusual
submixer settings, or if you want to apply effect processing
to specific input signals.
On the other hand, it may sometimes be convenient to save
a particular mixer setup with an individual Combination, to
set up special sub-mixer settings or effects processing for
particular inputs.
0–8
Menu
[Off, On]