3-7: Other T01-08, 3-8: Other T09-16 - Korg M3 Parameter Manual

Bend Range
Specifies the amount of pitch change that will occur when
the pitch bender is operated, in semitone units.
PRG: The pitch range specified by the program will be used.
–24...+24: This setting will be used regardless of the setting
in the program.
As long as this set to something other than PRG, you
can control the Bend Range using MIDI RPN Pitch
Bend Change messages. For more information, please
see page 79, and page 164 P.Bend (Pitch Bend).
Track 02...08, 09...16 (Track Number):
Here you can make pitch-related settings for MIDI tracks 2–
8 and 9–16. They are the same as for track 1. For more
information, please see "Track 01 (Track Number):," above.
▼3–5(6): Menu Command
• 0: Memory Status ☞p.271
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Rename Song ☞p.271
• 4: Delete Song ☞p.271
• 5: Copy From Song ☞p.271
• 6: Load Template Song ☞p.271
• 7: Save Template Song (Save as User Template
Song) ☞p.272
• 8: FF/REW Speed ☞p.272
• 9: Set Location (Set Location for Locate Key) ☞p.272
• 10: GM Initialize ☞p.273
• 11: Copy From Combi (Copy from
Combination) ☞p.273
• 12: Copy from Program ☞p.273
• 13: Detune BPM Adjust ☞p.188
For more information, please see "Sequencer: Menu
Command" on page 271.
SEQ P3: Track Param (Track Parameters) 3–7: Other T01–08, 3–8: Other T09–16
[PRG, –24...+00...+24]
3–7: Other T01–08,
3–8: Other T09–16
3–7a
3–7b
3–7c
Here you can make settings for the KARMA function and
scale for each MIDI track.
3–7(8)a: Location, Meter, Tempo, Tempo
Mode, Song Select, Track Select,
Reso, RPPR
3–7(8)b: Track Info
For more information, please see "0–1–1(2)a: Location,
Meter, Tempo, Tempo Mode, Song Select, Track Select, Reso,
RPPR" on page 195.
For more information, please see "2–1: Trim T01–08, 2–2:
Trim T09–16" on page 224.
3–7(8)c: KARMA/Scale
Track 01 (Track Number):
KARMA Track Off Control
[Normal, Track Off by KARMA Off, Track Off by
Nrm (Normal): The KARMA ON/OFF switch will not
control whether the track will sound. Usually you will use
the Normal setting.
Off (Track Off by KARMA Off): The track will sound as
usual when the KARMA ON/OFF switch is on.
The track will not sound when the KARMA ON/OFF
switch is off.
Use this when you want a specific track of multiple tracks
set to the same MIDI channel to be silent only when
KARMA is off.
On (Track Off by KARMA On): The track will not sound
when the KARMA ON/OFF switch is on.
The track will sound as usual when the KARMA ON/OFF
switch is off.
Use this when you are using a KARMA Module to control
multiple tracks that are set to the same MIDI channel, and
want a specific track to be silent only when the KARMA
function is on.
For example you can use this to play a two-track layer from
the keyboard when KARMA is off, and use one track to
sound the phrase when KARMA is on.
If the Status (Seq 3–1(2)c) of each track is INT, you can use
the KARMA Track Off Control setting to stop the oscillator
of each track from sounding.
3–7
Menu
KARMA On]
229