Korg M3 Parameter Manual page 398

Global mode
Copy Drum Kit
This command copies the settings of another drum kit to the
currently-edited drum kit.
Note: Drum kits 144 (GM)–152 (GM) cannot be edited, but
you may copy them to another drum kit and then edit them.
1. Select "Copy Drum Kit" to open the dialog box.
2. Select the copy source drum kit (From).
3. To execute the Copy Drum Kit command press the OK
button. To cancel without executing press the Cancel
button.
When you execute Copy Drum Kit, the settings of the
currently selected drum kit will be overwritten.
Copy Key Setup
This command copies the settings of an individual key to
another key. You can also copy settings from two or more
contiguous keys at once.
1. Select "Copy Key Setup" to open the dialog box.
2. In From Key, select the range of keys that you wish to
copy.
3. In To Key, select the copy destination key. If you
selected two or more keys in From Key, their settings
will be copied to the keys starting at To Key and contin-
uing upward.
4. To execute the Copy Key Setup command, press the OK
button. To cancel, press the Cancel button.
Swap Key Setup
This command exchanges (swaps) the settings of one key
with the settings of another key.
1. Select "Swap Key Setup" to open the dialog box.
2. Use Source Key 1 and Source Key 2 to specify the keys
whose settings you want to swap.
3. Press the OK button to execute the Swap Key Setup
command, or press the Cancel button to cancel.
388