Korg M3 Parameter Manual page 297

command lets you specify the Beat.Tick range, and to erase
only specific ranges of note data.
9. To execute the Erase Note command, press the OK but-
ton. To cancel, press the Cancel button.
Modify Velocity
This command modifies the velocity values of notes in the
specified area so that they will change over time according
to a selected curve.
1. In Track Select, specify the track whose velocity will be
modified.
2. Select "Modify Velocity" to open the dialog box.
3. Specify the range in which note velocity will be modi-
fied.
From Measure and To End of Measure specify the measure,
and Beat.Tick specify the beat and clock. (By default, From
Measure and To End of Measure will be set to the range
that you specified in the Track Edit page.)
4. Specify the range of notes that will be affected by the
Modify Velocity command.
Note Range: Bottom is the lower limit, and Top is the upper
limit. If you wish to edit all notes, set Bottom to C–1 and Top
to G9.
5. In Velocity Start Value specify the value at which the
velocity data will start, and in End Value specify the
final velocity value.
6. In Intensity, specify the degree to which the velocity
data will be adjusted toward the curve you specify in
step 7.
With a setting of 0 [%], the velocity will not change. With a
setting of 100 [%], the velocity will be exactly as described
by the curve.
7. Curve lets you select from six types of curve to specify
how the velocity will change over time.
8. To execute the Modify Velocity operation, press the OK
button. To cancel, press the Cancel button.
* The six curves are as follows.
For a Start Velocity of 1 and End Velocity of 127
Curve 1
127 127
Velocity Velocity
1 1
Start End Start
Measure Measure Measure
Curve 4
127 127
Velocity Velocity
1 1
Start End Start
Measure Measure Measure
Curve 2 Curve 3
127
Velocity
1
End Start End
Measure Measure Measure
Curve 5 Rndm
127
Velocity
RANDOM
1
End Start End
Measure Measure Measure
Sequencer: Menu Command Modify Velocity
Copy KARMA Module
For more information, please see "Copy KARMA Module"
on page 114.
Initialize KARMA Module
For more information, please see "Initialize KARMA
Module" on page 115.
Copy Scene
For more information, please see "Copy Scene" on page 115.
Swap Scene
For more information, please see "Swap Scene" on page 115.
Capture Random Seed
For more information, please see "Capture Random Seed"
on page 116.
Auto Assign RTC Name
For more information, please see "Auto Assign RTC Name"
on page 117.
Copy Insert Effect
For more information, please see "Copy Insert Effect" on
page 117.
However, the MIDI control channel specified in Ctrl Ch of
the IFX 1–5 page will not be copied.
Swap Insert Effect
For more information, please see "Swap Insert Effect" on
page 118.
However, the MIDI control channel specified in Ctrl Ch of
the IFX 1–5 page will not be swapped.
DrumKit IFX Patch
For more information, please see "DrumKit IFX Patch" on
page 190.
Copy MFX/TFX
For more information, please see "Copy MFX/TFX" on
page 118.
However, the MIDI control channel specified in Ctrl Ch of
the MFX 1–TFX page will not be copied.
Swap MFX/TFX
Note: For more information, please see "Swap MFX/TFX"
on page 118.
However, the MIDI control channel specified in Ctrl Ch of
the MFX 1–TFX page will not be swapped.
Write FX Preset
For more information, please see "Write FX Preset" on
page 118.
287