Korg M3 Parameter Manual page 410

Media mode
.KSC Allocation
.KSC file to be loaded
KMP000
KMP001
KMP003
Append
KMP005
KMP000
KMP001
KMP003
Clear
KMP005
5. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
2) Load Programs
All program data from a .PCG file will be loaded.
1. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
3) Load Program Bank
All program data of the selected bank will be loaded into the
bank you specify.
1. In To, select the loading destination bank.
2. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
Note: Program banks I-A–I-E are bank type EDS, and the I-F
bank is bank type RADIAS. The bank types of these banks
are fixed; you cannot set the To field to a bank whose type
differs from the data selected for loading.
Program banks U-A–U-G can be freely specified as either
EDS or RADIAS (see "Set Prog User-Bank Type" on
page 382) You can load .PCG files of a bank type that differs
from the M3's current bank type setting. This will also
overwrite the bank type.
4) Load a Program
Data for the selected program will be loaded into the
program number you specify.
1. If you wish to load a program other than the one
already selected, use Program (upper line) to select the
program that you wish to load.
400
Internal memory of Internal memory of
the M3 after loading the M3 before loading
KMP000 KMP000
KMP002 KMP002
KMP003 KMP003
KMP004
KMP005
KMP006
KMP007
KMP000 KMP000
KMP001
KMP002
KMP003 KMP003
KMP005
[Bank I–A...I–F, Bank U–A...U–G]
Note: The selected program can be played from the keyboard
even before you load it. This is convenient when you want
to audition the program to be loaded. For more information,
please see "PCG Preview" on page 391.
2. In To Program, (lower line) select the bank and pro-
gram into which the data will be loaded. When you
press the popup button, the Bank/Program Select win-
dow will appear.
Note: Banks of a bank type that differs from the selected
program can't be selected for the To field.
3. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
5) Load Combinations
All combinations in the .PCG file will be loaded.
1. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
6) Load Combination Bank
[Bank I–A...I–G, Bank U–A...U–G]
All combinations in the selected bank will be loaded into the
bank you specify.
1. In To, select the loading destination bank.
2. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
7) Load a Combination
This loads the selected Combination into a specified Bank
and number in internal memory.
1. If you wish to load a combination other than the one
already selected, use Combination (upper line) to select
the combination that you wish to load.
Note: The selected combination can be played from the
keyboard even before you load it. This is convenient when
you want to audition the combination to be loaded. For
more information, please see "PCG Preview" on page 391.
2. In "To Combination" (lower line), select the bank and
combination into which the data will be loaded.
When you press the popup button, the "Bank/Combination
Select" window will appear.
3. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.