5-1-3: -2 T01-08, 5-1-4: -2 T09-16; 5-1-5: -3 T01-08, 5-1-6: -3 T09-16 - Korg M3 Parameter Manual

Combination mode
5–1–3: –2 T01–08,
5–1–4: –2 T09–16
5–1
–3a
5–1
–3b
5–1
–3c
5–1–3(4)a: Combination Name, Tempo
5–1–3(4)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 147.
5–1–3(4)c: MIDI Filter2
Timbre 01 (Timbre Number):
Enable JS X as AMS
Specifies whether or not MIDI pitch bend messages (the X
axis of the joystick) will be received to control the AMS effect
assigned to JS X. (This is not a filter for MIDI pitch bend
message reception.) For more information, please see
"Alternate Modulation Sources (AMS)" on page 587.
Enable JS+Y
Specifies whether MIDI CC#1 (the +Y axis of the joystick, or
a realtime modulation slider assign setting) will be
transmitted and received.
Enable JS–Y
Specifies whether MIDI CC#2 (the –Y axis of the joystick, or
a realtime modulation slider assign setting) will be
transmitted and received.
Enable Ribbon
Specifies whether or not MIDI CC#16 (the ribbon controller,
or specified as the assignment of a realtime modulation
slider) will be transmitted or received.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter2 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
▼5–1–3(4): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy from Program ☞p.185
For more information, please see "Combination: Menu
Command" on page 185.
158
5–1–5: –3 T01–08,
5–1–6: –3 T09–16
5–1
–3
5–1
Menu
–5a
5–1
–5b
5–1
–5c
Here you can specify whether the effects of sliders 1–8 will
be transmitted when the CONTROL ASSIGN REALTIME
CONTROL switch is selected. The MIDI control messages of
sliders 1–4 are fixed.
5–1–5(6)a: Combination Name, Tempo
5–1–5(6)b: Timbre Info
For more information, please see "2–1: EQ Trim T01–08, 2–2:
EQ Trim T09–16" on page 147.
[Off, On] 5–1–5(6)c: MIDI Filter3
Timbre 01 (Timbre Number):
Enable Realtime Control Slider-1
Specifies whether Slider 1 MIDI CC#74 (the M3's filter cutoff
frequency) will be transmitted and received.
[Off, On]
Enable Realtime Control Slider-2
Specifies whether Slider 2 MIDI CC#71 (the M3's filter
resonance) will be transmitted and received.
[Off, On]
Enable Realtime Control Slider-3
Specifies whether Slider 3 MIDI CC#79 (the M3's filter EG
intensity) will be transmitted and received.
Enable Realtime Control Slider-4
[Off, On]
Specifies whether Slider 4 MIDI CC#72 (the M3's filter/amp
EQ release time) will be transmitted and received.
Timbre 02...08, 09...16 (Timbre Number):
These are the MIDI Filter3 settings for timbres 2–8 and 9–16.
They are the same as for timbre 1. For more information,
please see "Timbre 01 (Timbre Number):," above.
▼5–1–5(6): Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy from Program ☞p.185
For more information, please see "Combination: Menu
Command" on page 185.
5–1
–5
Menu
[Off, On]
[Off, On]
[Off, On]
[Off, On]