054: Rotary Speaker - Korg M3 Parameter Manual

Dry, 1 : 99... Sets the balance between the
Wet/Dry
99 : 1, Wet effect and the dry input
Selects a modulation source for
g Src Off...Tempo
Wet/Dry
Sets the modulation amount
Amt –100...+100
for Wet/Dry
b: Control Mode
c: Preset Type
d: Custom Mix
e: Custom Depth
f: Custom Speed [Hz]
If Control Mode=Preset, you can use c: Preset Type to select
the effect. In this case, the Custom Mix/Depth/Speed
settings are ignored. If Control Mode=Custom, the Custom
Mix/Depth/Speed settings are valid, and the c: Preset Type
setting is ignored.
c: Amt
If Preset Type=V1 and Src=JS+Y, you can set this to +5 and
move JS +Y to control the effect in the order of
V1➝C1➝V2➝C2➝V3➝C3.

054: Rotary Speaker

This effect simulates a rotary speaker, and obtains a more
realistic sound by simulating the rotor in the low range and
the horn in the high range separately. The effect also
simulates the stereo microphone settings.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
Horn
Rotary Speaker
+
Rotor
Right
D -mod
Mode Switch: Rotate/Stop
D -mod
Speed Switch: Slow/Fast
D -mod
Manual Speed Control
Switches between speaker
Mode Switch Rotate, Stop
rotation and stop
Selects a modulation source for
Src Off...Tempo
a Rotate/Stop
Sets the switch mode for
Toggle,
Mode Rotate/Stop modulation
Moment
Switches the speaker rotation
Speed
Slow, Fast speed between slow and fast
Switch
Selects a modulation source for
b Src Off...Tempo
Slow/Fast
Sets the switch mode for Slow/
Toggle,
Mode Fast modulation
Moment
Sets a modulation source for
Manual
c Off...Tempo direct control of rotation speed
Speed Ctrl
How quickly the horn rotation
Horn
Acceleration 0...100 speed in the high range is
switched
d
Adjusts the (high-range side)
Stop, horn rotation speed. Standard
Horn Ratio
0.50...2.00 value is 1.00. Selecting "Stop"
will stop the rotation
Determines how quickly the
Rotor
Acceleration 0...100 rotor rotation speed in the low
range is switched
e
Adjusts the (low-frequency)
Stop, rotor speed. Standard value is
Rotor Ratio
0.50...2.00 1.00. Selecting "Stop" will stop
the rotation
Sets the level balance between
Horn/Rotor Rotor, 1...99,
f the high-frequency horn and
Balance Horn
low-frequency rotor
Wet / Dry
Mic Distance
Horn/Rotor
Mic Spread
Balance
Speaker Simulation
Wet / Dry
p.475
p.475
p.475
p.475
p.475
p.475
Modulation and Pitch Shift (Mod./P.Shift)
Sets the distance between the
Mic Distance 0...100 microphone and rotary speaker
g
Sets the angle of left and right
Mic Spread 0...100
microphones
Dry, 1 : 99... Sets the balance between the
Wet/Dry
99 : 1, Wet effect and the dry input
Selects a modulation source for
h Src Off...Tempo
Wet/Dry
Sets the modulation amount
Amt –100...+100
for Wet/Dry
a: Mode
This parameter sets how the modulation source switches
between rotation and stop.
When Mode = Toggle, the speaker rotates or stops
alternately each time you press the pedal or move the
joystick. Via MIDI, rotation will switch between start and
stop each time the modulation amount exceeds 64.
When Mode = Moment, the speaker rotates by default, and
stops only when you press the pedal or move the joystick.
Via MIDI, modulation values above 64 make the speaker
rotate, and values below 64 make it stop.
b: Speed Switch
This parameter controls how the rotation speed (slow and
fast) is switched via the modulation source.
When Mode = Toggle, the speed will switch between slow
and fast each time you press the pedal or move the joystick.
Via MIDI, the speed will switch each time the modulation
amount exceeds 64.
When Mode = Moment, the speed is usually slow. It
becomes fast only when you press the pedal or move the
joystick. Via MIDI, modulation values above 64 set the
speed to Fast, and values below 64 set it to Slow.
c: Manual Speed Ctrl
If you wish to control the rotation speed manually, instead
of switching between Slow and Fast, select a modulation
source in the Manual Speed Ctrl parameter. If you don't
want to use manual control, set this to Off.
d: Horn Acceleration
e: Rotor Acceleration
On a real rotary speaker, the rotation speed accelerates or
decelerates gradually after you switch the speed. The Horn
and Rotor Acceleration parameters set the transition times
between fast and slow speeds.
g: Mic Distance
g: Mic Spread
This is a simulation of stereo microphone settings.
Mic Spread
Microphone
Mic Distance
Rotary Speaker (Top View)
p.475
p.475
Rotary Speaker - Mic Placement
Microphone
Mic Distance
475