Applying An Insert Effect To The Audio Input And Sampling The Result; Applying The Valve Force Effect To The Audio Input And Sampling The Result; Saving Your Multisamples And Samples To Media - Korg TRITON Quick Start Manual

Applying an insert effect to the audio input
and sampling the result
Press the Input Setup tab to access the P0: Record-
1
ing, Input/Setup page.
Set the Input1 "Pan" to C064, and "BUS" to IFX1.
2 Press the [MENU] key to access the page jump
page, and press P8: Insert Effect.
The P8: Insert Effect page will appear.
Press the Insert FX tab to access the Insert FX page.
3 Select "IFX1," use the numeric keys to enter [5], [2],
and press the [ENTER] key to confirm 052: Reverb
Hall. Press "IFX1 On/Off" to turn it ON.
4 Speak into the mic, and verify that reverb is
applied to the sound.
You can adjust the effect settings in the IFX1 page
(IFX1 tab).
After pressing the [EXIT] key, press the Recording
5
tab to access the P0: Recording, Recording page.
5
6 Set "Sample Mode" to Stereo.
Now the sound of the internal LR channels can be
sampled in stereo.
7 Press the Create button to create a new index.
8 Sample the sound.
Press the SAMPLING [REC] key, and then the SAM-
PLING [START/STOP] key to enter record-ready
mode.
Speak the word that you want to sample.
Recording will start when the input exceeds the
"Level" –30 dB level.
Press the SAMPLING [START/STOP] key to stop.
Play the keyboard.
9
When you play the "OrigKey" note, you will hear
the sound that was sampled.
Applying the Valve Force effect to the audio
input and sampling the result
1 Press the VALVE FORCE [ON/OFF] key to make it
light. Valve Force is enabled.
2 Press the [MENU] key to access the page jump
menu, and display P9: VALVE FORCE.
The P9: VALVE FORCE page will appear.
Set "Placement" to Insert (User Indiv. 3/4 BUS).
3 Press the [EXIT] key, and then press the Input
Setup tab to select the P0: Recording, Input/Setup
page.
Set the Input1 "Pan" to C064, and "BUS" to 3
(Tube).
If "Placement" is set to Insert (Use Indiv. 3/4 BUS),
selecting 3 (Tube), 4 (Tube), or 3/4 (Tube) will send
the sound through Valve Force.
7
4 Sample as described in steps 5–9 of "Applying an
insert effect to the sound while you sample."
You can also combine an insert effect with Valve Force
while you sample. Refer to PG p.142.
Saving your multisamples and samples to
media
If you are satisfied with the multisamples and samples
you created and would like to keep them, you must save
them to media (sold separately).
The multisamples and samples you create will disap-
pear when you turn off the power. For the Save proce-
dure, refer to OG p.117. For details on the types of
media you can use, refer to OG p.137.
21