Korg M3 Parameter Manual page 411

8) Load Drum Kits
All drum kits in the .PCG file will be loaded.
1. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
9) Load Drum Kit
[000–031(INT), 032–047(U–A)...128–143(U–G)]
This command loads all drum kit data from the selected
drum kit block into the drum kit block that you specify as
the load-destination.
1. In To, select the loading destination bank.
2. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
If you've selected U-A–U-G as the load-destination for
the selected drum kit bank (INT), 000–015 will be
loaded. If you've selected INT as the load-destination
for U-A–U-G, the data will be loaded into 000–015.
10) Load a Drum Kit
The selected drum kit will be loaded into the drum kit
number you specify as the loading destination.
1. If you wish to load a drum kit other than the one
already selected, use Drum Kit (upper line) to re-select
the drum kit you wish to load.
Note: The selected drum kit can be played from the keyboard
even before you load it. This is convenient when you want
to audition the drum kit to be loaded. For more information,
please see "PCG Preview" on page 391.
2. In To Drum Kit (lower line), select the loading destina-
tion drum kit.
3. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
11) RADIAS formant Motion
This command loads all RADIAS formant motion data from
a .PCG file.
Note: This dialog box can be displayed if the optional EXB-
RADIAS is installed. For details, please see the optional
"EXB-RADIAS for M3 Manual" (PDF).
12) Load a RADIAS Formant Motion
This command loads the selected single RADIAS formant
motion data into the number that you specify as the load-
destination.
Media: Menu Command Load selected
Note: This dialog box can be displayed if the optional EXB-
RADIAS is installed. For details, please see the optional
"EXB-RADIAS for M3 Manual" (PDF).
13) Load Drum Track Patterns
This command loads all drum track user patterns from the
.PCG file.
1. Press the OK button to load the data, or press the Can-
cel button if you decide to cancel.
14) Load a Drum Track Pattern
This command loads the selected single drum track user
pattern data into the drum track user pattern number that
you specify as the load-destination.
1. If you want to load a pattern other than the selected
pattern, use "Pattern" (the upper line) to re-select the
pattern that you want to load.
2. Use the "To Pattern" field (the lower line) to specify the
load-destination pattern.
3. Press the OK button to load the data, or press the Can-
cel button if you decide to cancel.
15) Load Global Setting
Global setting data in the .PCG file will be loaded.
This includes Global mode parameters other than drum kits.
Memory protect and system clock settings will not be
loaded.
1. To load the data, press the OK button. To cancel with-
out loading, press the Cancel button.
16) Load .SNG
All data in the .SNG file will be loaded.
1. Use Select .SNG Allocation to specify how the song
data from the .SNG file will be loaded.
Append: The song will be loaded after the last song data
that already exists in internal memory. At this time, the song
data in the .SNG file being loaded will be packed forward.
(See diagram in ".SNG Allocation" on page 399)
Select this when you want to add song data from media
without erasing the song data that currently exists in
internal memory. Cue list data will not be loaded.
401