Combi P7-4: Karma 4; 7-4-1: Perf Rtp - Korg M3 Parameter Manual

COMBI P7–4: KARMA 4
7–4–1: Perf RTP
(Perf Real-Time Parameters)
7–4
–1a
7–4
–1b
Here you can assign controllers to KARMA Performance
Real-Time Parameters (Perf. RTP) outside of the GE Real-
Time Parameters that control the internal settings of the GE.
By assigning these to KARMA Sliders 1–8 and KARMA
Switches 1–8 etc., you can control them in real-time while
you play.
Parameters selected in Group and Param (Global 7–4–
1b) and for which A/B/C/D is turned on cannot be
edited in pages such as the KARMA key zone
parameter or KARMA module parameter pages.
7–4–1a: Combination Name, Tempo
For more information, please see "2–1(2)a: Combination
Name, Tempo" on page 147.
7–4–1b: Perf Real-Time Parameters
Select (Perf RTP Select)
This selects the performance realtime parameters you'll edit.
Group [Off, PE, Mix, Control, Trigger, Key Zones,
Param (Parameter)
[---, Time Signature...Retrigger Each Time]
Min (Min Value)
Max (Max Value)
Value
For more information, please see "7–2–2b: Perf RTP 1–2, 3–4,
5–6, 7–8 (Perf Real-Time Parameters)" on page 91.
A/B/C/D
Specifies whether the Perf Real-Time Parameter settings will
be valid for each Module.
On (checked): The Perf Real-Time Parameter settings will be
valid.
Off (unchecked): The Perf Real-Time Parameter settings
will be ignored.
Assign [---, SL1...8, SL1s...8s, SW1...8, Dyn1...8]
Polarity
For more information, please see "POL. (GE Real-Time
Parameter Polarity)" on page 91.
COMBI P7–4: KARMA 4 7–4–1: Perf RTP (Perf Real-Time Parameters)
7–4
–1
Menu
[1–2, 3–4, 5–6, 7–8]
Random Seeds]
[–8192...8191]
[–8192...8191]
[–8192...8191]
[Off, On]
[+, –]
Group: PE (Performance)
For more information, please see "Group: PE
(Performance)" on page 92.
Group: Mix
For more information, please see "Group: Mix" on page 92.
In Combination and Sequencer modes, you will also be able
to specify Run in addition to the settings of Program mode.
Run
Assign the function of Run (Combi 0–5b).
+0000: Off
+0001: Run
For more information, please see "Run" on page 125.
Group: Control
For more information, please see "Group: Control" on
page 92.
Group: Trigger
For more information, please see "Group: Trigger" on
page 93.
Trigger By Module
Assign the function of Trigger By Module (Combi 7–2–5a).
+0000: Off
+0001: A
+0002: B
+0003: C
+0004: D
For more information, please see "Trigger By Module" on
page 170.
GE Phrase Length
Assign the function of GE Phrase Length (Combi 7–2–5a).
For more information, please see "GE Phrase Length" on
page 170.
Group: Key Zones
For more information, please see "Group: Key Zones" on
page 93.
Group: Random Seeds
For more information, please see "Group: Random Seeds"
on page 94.
▼7–4–1: Menu Command
• 0: Write Combination ☞p.185
• 1: Panel–SW Solo Mode On ☞p.106
• 2: Exclusive Solo ☞p.107
• 3: Copy KARMA Module ☞p.114
• 4: Initialize KARMA Module ☞p.115
• 5: Copy Scene ☞p.115
• 6: Swap Scene ☞p.115
• 7: Capture Random Seed ☞p.116
• 8: Copy from Program ☞p.185
For more information, please see "Combination: Menu
Command" on page 185.
[+0000, +0001]
[+0000...+0004]
[+0000...+0100]
173