Output - HikRobot SC2000 Series User Manual

Parameter Name
Input Logic Level Low
Input Logic Level High
Input Falling Delay
Input Rising Delay
Note
● VCC stands for Volt Current Condenser, and it is the device's input voltage.
● The breakdown voltage is 36 VDC, and keep voltage stable.

4.2 Output

The device's Line 5/6/7 are outputs, and Line 2/3/4 are bi-directional I/O that can be set as
outputs. The type of output signal can be set as PNP or NPN via web parameter. When the output
signal is PNP or NPN, the respective internal circuit is as follows.
Note
The maximum output current of output signal is 200 mA.
SC2000 Series Vision Sensor User Manual
Table 4-1 Input Electrical Feature
Parameter Symbol
VL
VH
TDF
TDR
0 VDC to 9 VDC (VCC=24 VDC)
0 VDC to 5.4 VDC (VCC=12
VDC)
11 VDC to 24 VDC (VCC=24
VDC)
7.56 VDC to 12 VDC (VCC=12
VDC)
1.3 μs to 3.5 μs
1.3 μs to 3.5 μs
7
Value