Chapter 9 System And Maintenance; Permission And Password Management; Set Admin Password; Set Technician Permission And Password - HikRobot SC2000 Series User Manual

Chapter 9 System and Maintenance

9.1 Permission and Password Management

In user management module, you can edit administrator password, set technician password and
permission, etc.

9.1.1 Set Admin Password

User management module allows you to edit admin password, set technician password and its
permission to different operation modules.
Note
● Only the admin has the permission to access to user management module. If you log in as
technician, there is no this module.
● The admin can access to all operation and tool modules via web, and assign module operation
permission to technician, while technician can access to and set module parameters assigned by
the admin only.
● The default admin password is Abc1234.
Click User Management, enter Old Password, New Password, Confirm Password, and Click OK.
Note
After editing admin password, you need to log in again.

9.1.2 Set Technician Permission and Password

When logging in as admin, you have the permission to set technician password and its permission
SC2000 Series Vision Sensor User Manual
Figure 9-1 Set Admin Password
63