Summary of Contents for HikRobot SC2000E Mini Series
Page 1
SC2000E(Mini) Series Vision Sensor Quick Start Guide...
Page 2
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKROBOT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS.
Page 3
SC2000E(Mini) Series Vision Sensor Quick Start Guide THE PERFORMANCE DATA IN THIS PUBLICATION IS BASED ON HIKROBOT'S INTERNAL RESEARCH/EVALUATION. ACTUAL DATA MAY VARY DEPENDING ON SPECIFIC CONFIGURATIONS AND OPERATING CONDITIONS AND HIKROBOT SHALL NOT BEAR THE CONSEQUENCES ARISING THEREFROM. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Page 4
SC2000E(Mini) Series Vision Sensor Quick Start Guide 2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documentation for specific battery information. The battery is marked with this symbol, which may include lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg).
Page 5
SC2000E(Mini) Series Vision Sensor Quick Start Guide Transportation ● The product contains precision optical components and electronic components. During transportation, storage and installation, incorrect operations like heavy pressure and violent vibration should be avoided. Otherwise, the product may be damaged. ●...
Page 6
● The basic knowledge and operation skills of low voltage wiring and Low voltage electronic circuit connection. ● The ability to comprehend the contents of this manual. Contact Information Hangzhou Hikrobot Technology Co., Ltd. No. 399 Danfeng Road, Binjiang District, Hangzhou, 310051, China E-mail: tech_support@hikrobotics.com Website: https://en.hikrobotics.com/...
Page 8
SC2000E(Mini) Series Vision Sensor Quick Start Guide 8.2 Why the image is not smooth in live view? ............... 21 8.3 Why the image is very dark? ....................21 8.4 Why there is no image in live view? ................... 21 8.5 What can I do if I forget the login password? ..............22...
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 1 Overview 1.1 Introduction With built-in positioning and measurement algorithms, SC2000E(Mini) vision sensor can detect object’s existence, count patterns and spot, etc. It can be monitored and operated via the SCMVS client. It can output results via RS-232 and Ethernet, and cooperate with other processes via IO. The vision sensor supports multiple result output methods and customized result text output.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 2 Appearance Note Appearance here is for reference only. Refer to the device's specification for detailed dimension information. Figure 2-1 Appearance Table 2-1 Component Description Name Description Focus Knob It is used to adjust focal length manually. It is used to fix the device to the installation position.
Page 11
SC2000E(Mini) Series Vision Sensor Quick Start Guide Name Description It is a status indicator. The indicator is green when the solution loads STS Indicator normally. When the device starts or loading the solution fails, it is red. PWR Indicator It is a power indicator. The indicator is green when the device operates normally.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 3 17-Pin Interface and Cable 3.1 17-Pin Interface Read the following section to get definitions of 17-pin interface. Figure 3-1 17-Pin Interface Table 3-1 Pin Definitions Signal I/O Signal Source Description Supplied Cable DC_PWR Direct current power supply positive Red open cable...
SC2000E(Mini) Series Vision Sensor Quick Start Guide Signal I/O Signal Source Description Supplied Cable Purple open cable MDI0- Fast Ethernet signal MDI0- RJ45 connector MDI1+ Fast Ethernet signal MDI1+ RJ45 connector GPIO0 Line 0+ Bi-directional I/O, and it is the trigger Gray open cable by default.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 4 Installation 4.1 Installation Preparation You need to prepare following accessories before installation. Table 4-1 Accessories Name Quantity Description It refers to the supplied 17-pin cable that is included 17-Pin Cable in the package. It refers to category 5 network cable or above.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 5 Device Connection Device connection to the client software is required for device’s configuration and remote operations. This section introduces how to install the client software, set PC and device network, connect the device to the client software, etc. 5.1 Install Client Software SCMVS is a client software for device configuration and remote operations.
SC2000E(Mini) Series Vision Sensor Quick Start Guide 5.2 Turn off Firewall To ensure stable client running and image transmission, you are recommended turning off Windows firewall before using the client software. Steps Note For different Windows versions, the path name or interface may differ. Please refer to the actual condition.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Select Obtain an IP address automatically to get an IP address of the PC automatically. Or select Use the following IP address to set an IP address for the PC manually. Figure 5-3 Set PC Network 3.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Figure 5-4 Edit IP Address 6. Click OK. 5.5 Login Note ● Make sure that your device IP address is in the same network segment with the PC where you installed the client software before connecting the device to it. ●...
Page 19
SC2000E(Mini) Series Vision Sensor Quick Start Guide Figure 5-5 Login Interface 4. (Optional) Check Remember me to remember the password if necessary.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 6 Client Layout and Operation Flow 6.1 Main Window Introduction After logging into the client software, you can see the main window as shown below. Figure 6-1 Main Window Note ● The specific interfaces of the client software may differ by its versions. ●...
SC2000E(Mini) Series Vision Sensor Quick Start Guide Name Description This area displays images and results under camera mode and image mode Live View Window in real time. Under image mode, you can import images into the device. You can switch languages and cameras, view the user manual and client Other Areas version information here.
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 7 I/O and Serial Port Introduction This section introduces the electrical feature and wirings of the device’s I/O and serial port. The device has four configurable bi-directional I/O (Line 0/1/2/3) and one RS-232. The I/O type can be configured as trigger, switch solution or output.
SC2000E(Mini) Series Vision Sensor Quick Start Guide 7.2.1 Input Wiring Note Input signal wiring may differ by external device types. PNP Device If you use the pull-down resistor of the supplied 17-pin cable, the wiring is shown below. PNP Device Power Device Power Input Signal Signal Line...
SC2000E(Mini) Series Vision Sensor Quick Start Guide If the VCC of NPN device is 12 VDC or 24 VDC and the external pull-up resistor is used, it is recommended to use 1 KΩ pull-up resistor. NPN Device Power Device Power Input Signal Signal Line Device...
SC2000E(Mini) Series Vision Sensor Quick Start Guide NPN Device If the VCC of NPN device is 12 VDC or 24 VDC, and the pull-up resistor of the supplied 17-pin cable is used. Device Power Pull-Up and Pull-Down NPN Device Power Resistor Device Output Signal...
Page 28
SC2000E(Mini) Series Vision Sensor Quick Start Guide Table 7-4 Pin Definitions Pin No. Name Description Transmits data Receives data Signal ground...
SC2000E(Mini) Series Vision Sensor Quick Start Guide Chapter 8 FAQ (Frequently Asked Question) 8.1 Why the client software cannot list devices? Reason ● Device is not started up normally. ● Network connection exception occurs. Solution ● Check device power wiring (observe PWR indicator). ●...
Page 30
SC2000E(Mini) Series Vision Sensor Quick Start Guide Solution Send trigger signal to device or disable trigger mode. 8.5 What can I do if I forget the login password? Solution Click Forgot Password in the login interface to view the device serial No., and mail it to the technical support personnel or call them to get the corresponding resetting file.
Need help?
Do you have a question about the SC2000E Mini Series and is the answer not in the manual?
Questions and answers