Chapter 8 Solution Operation; Control Solution; View Solution Status - HikRobot SC2000 Series User Manual

In basic information module, you can operate and switch different saved solutions, view device
information, etc.

8.1 Control Solution

The solution control is used to control solution operation or not, and display solution result.
Icon
/

8.2 View Solution Status

The solution operation information module records and displays the solution name, running time,
detection quantity, and NG quantity in real-time.
You can view and edit the solution name. Click
Note
If it is a newly created solution, the solution name is untitled by default. You cannot edit unnamed
solution name here.
Run time refers to the device running time from powering on to current solution operation. When
the solution is not operating, operating time stops. When the solution continues to operate or
load other solutions, it continues to operate.
SC2000 Series Vision Sensor User Manual

Chapter 8 Solution Operation

Figure 8-1 Control Solution
Table 8-1 Icon Description
Click it to start solution operation for once only.
Click it to start solution operation continuously.
Click it to end solution operation.
It displays the operation status of the solution.
● When logic tool is not selected, the system displays the result of all
modules operation and calculation. If the result is 0, the system displays
NG. Otherwise, the system displays OK.
● When logic tool is selected, the system displays the result of logic tool
you selected.
Description
to edit solution name.
59