Set Gain; Set Exposure Mode; Set Brightness - HikRobot SC2000 Series User Manual

7.1.2 Set Gain

The device supports 3 types of Gain Mode, including OFF, ONCE and CONTINUOUS.
OFF
When the gain mode is set as OFF, you can enter the gain value manually.
ONCE
When the gain mode is set as ONCE, the device adjusts the gain automatically once according to
the image brightness.
CONTINUOUS
When the gain mode is set as CONTINUOUS, the device adjusts the gain continuously according
to the image brightness.
Note
● When setting Gain Mode as ONCE or CONTINUOUS, Gain parameter does not take effect.
● When increasing the gain, the image noise will increase too, which will influence image quality.

7.1.3 Set Exposure Mode

The device supports 3 types of Exposure Mode, including OFF, ONCE and CONTINUOUS.
OFF
When the exposure mode is set as OFF, you can enter the exposure time manually.
ONCE
When the exposure mode is set as ONCE, the device adjusts the exposure time automatically
once according to the image brightness.
CONTINUOUS
When the exposure mode is set as CONTINUOUS, the device adjusts the exposure time
continuously according to the image brightness.
Note
When setting Exposure Mode as ONCE or CONTINUOUS, Exposure Time parameter does not take
effect.

7.1.4 Set Brightness

When the gain mode or exposure mode is continuous, you can set brightness. Otherwise, the
brightness is not available. The range of the brightness is from 0 to 255.
SC2000 Series Vision Sensor User Manual
17