16-Bit Capture Mode - Abov MC80F0304 User Manual

MC80F0304/08/16

13.5 16-bit Capture Mode

Timer register is being run will 16 bits. The clock source of the 16-bit capture mode is the same as 8-bit capture, except that the The clock source of the Timer 2 is selected either internal or ex- ternal clock by bit T2CK[2:0]. In 16-bit mode, the bits
Timer 0 is selected either internal or external clock by bit T3CK1,T3CK0, CAP3 and 16BIT of TM3 should be set to "1" re-
T0CK[2:0]. In 16-bit mode, the bits T1CK1, T1CK0, CAP1 and spectively as shown in Figure 13-16 .
ure 13-15 . 16BIT of TM1 should be set to "1" respectively as shown in Fig-
7 6 5 4 3 2 1 0 ADDRESS: 0D0
TM0 - - CAP0 T0CK2 BTCL T0CK1 T0CK0 T0CN T0ST INITIAL VALUE: --00 0000 H B
- - 1 X X X X X
X means don't care
7 6 5 4 3 2 1 0
TM1 POL 16BIT PWM1E CAP1 BTCL T1CK1 T1CK0 T1CN T1ST ADDRESS: 0D2 INITIAL VALUE: 00 H H
X 1 0 1 1 1 X X
X means don't care
Edge T0CK[2:0]
Detector
EC0 PIN 111 T0ST
÷ 2 000 0: Stop
IN X PIN ÷ 4 001 1: Clear and start
÷ 32 ÷ 8 010 T1 + T0 (16-bit)
÷ 128 100 011 clear
÷ 512 101 T0CN Capture
÷ 2048 110 CDR1 + CDR0
MUX (16-bit)
IEDS[1:0] Higher byte Lower byte
CAPTURE DATA
INT0 PIN "01" "10" INT0
INT0IF INTERRUPT
"11"
Figure 13-15 16-bit Capture Mode of Timer 0, 1
72 November 4, 2011 Ver 2.12