Replacing The Cable Chain - ABB Feather Duster V2 Product Manual

5.2.2 Replacing the cable chain

Location of the cable chain
The Feather Duster V2 cabling comprises the cabling from the Feather Duster V2
to the robot base, both internal and external, as well as the cabling to the controller
box.
External cabling is easy to be replaced. This section mainly concerns the
replacement of the internal cabling, especially the cable chain. While, the connection
between the controller box and the feather duster has to be replaced either.
The cable chain is located as shown in the figure.
xx1800001572
Required spare parts
Spare part
front cover
back cover
Controller box
LPT080-0220-05S-01A
Product manual - Feather Duster V2
3HAX010000210 Revision: A
Article number
3HAX010000247
3HAX010000248
3HAX010000301
3HAX010000411
© Copyright 2018 ABB. All rights reserved.
5 Repair
5.2.2 Replacing the cable chain
Note
PDCPD cover
PDCPD cover
Slip ring
Continues on next page
103