ABB Feather Duster V2 Product Manual page 55

Fit the lifting accessories
1
2
3
4
Product manual - Feather Duster V2
3HAX010000210 Revision: A
3.3.2 Lifting Feather Duster V2 with lifting accessories
Action
Fit the lifting screws (2 pcs) to the steel
structure frame.
CAUTION
The lifting eye nuts must be fitted to the
positions shown in the figure to balance
the Feather Duster V2 while lifting.
Fit the round-sling to the lifting eye nut
and to the overhead crane.
CAUTION
The Feather Duster V2 weighs 120 kg.
All lifting accessories used must be
sized accordingly!
WARNING
Personnel must not, under any circum-
stances, be present under the suspen-
ded load!
© Copyright 2018 ABB. All rights reserved.
3 Installation and commissioning
Note
xx1800001324
xx1800001325
Continues on next page
Continued
55