ABB Feather Duster V2 Product Manual page 94

4 Maintenance
4.4.4 Inspecting the timing belt
Continued
4
5
94
Action
If any damage or wear is detected, the part
must be replaced!
Check the timing belt for tension.
Wen you pinch the timing belt, the distance
between two sides should be approximately
50--55 mm. If the belt tension is not correct,
adjust it!
© Copyright 2018 ABB. All rights reserved.
Note
xx1600000686
Product manual - Feather Duster V2
3HAX010000210 Revision: A