About Feather Duster V2; Feather Duster V2 System; Introduction - ABB Feather Duster V2 Product Manual

2 About Feather Duster V2

2.1 Feather Duster V2 system

2.1.1 Introduction

General
The Feather Duster V2 is a pre-paint finishing equipment mounted on a 6-axis
manipulator. It is used to remove dust and dirt particles from car bodies and
to-be-painted surfaces.
The Feather Duster V2 utilizes brushes manufactured from ostrich feathers to
remove contaminants, which are then vacuumed with an exhaust fan. It replaces
the tack-off machine with more flexibility and high efficiency.
Besides the robot on which the Feather Duster V2 is installed and the robot
controller, a complete Feather Duster V2 system mainly consists of a feather roller,
ionization unit, exhaust system, compressed air system and process cabinet.
Structure
The following figure shows the complete Feather Duster V2 system.
xx1800001263
Item
A
B
C
D
Product manual - Feather Duster V2
3HAX010000210 Revision: A
G
F
E B
Description
Feather roller
Ionization unit
Robot
Exhaust system
© Copyright 2018 ABB. All rights reserved.
2 About Feather Duster V2
2.1.1 Introduction
D
C
A
Note
See Feather roller on page
See Ionization unit on page
ABB IRB 6640 or IRB 6700
For applicable robot variants, see
on page 50.
See Exhaust system on page
Continues on next page
40.
42.
Robot
45.
35