ABB Feather Duster V2 Product Manual page 90

4 Maintenance
4.4.3 Inspecting the cabling and exhaust hose
Continued
Inspection, cabling and exhaust hose
Use this procedure to inspect the robot cabling.
1
2
90
Action
Visually inspect:
• the cabling from the Feather Duster
V2 to the robot base, both internal
and external
• the cabling to the process cabinet
• the exhaust hose from the Feather
Duster V2 to the exhaust fan
Look for abrasions, cuts or crush damages.
Note
To inspect the internal cabling, remove the
carbon fiber covers first.
Replace the cabling or exhaust hose if wear
or damage is detected.
© Copyright 2018 ABB. All rights reserved.
Note
Product manual - Feather Duster V2
3HAX010000210 Revision: A