ABB Feather Duster V2 Product Manual page 100

5 Repair
5.2.1 Replacing the feather roller
Continued
Replacing the feather brushes
Removing the feather brushes
1
2
Refitting the feather brushes
1
2
Continues on next page
100
Action
Remove the locknut at either end of the
roller shaft.
Remove feather brushes one by one.
Action
Stack feather brushes one by one to the
roller shaft.
Make sure the feathers are in correct orient-
ation.
Secure with the locknut.
CAUTION
Do not press the locknut too tight; other-
wise, the brushes may be distorted.
© Copyright 2018 ABB. All rights reserved.
Note
xx1600000920
xx1600000921
Note
See Correct feather rotation on page 52
correct feather orientation.
xx1600000920
Product manual - Feather Duster V2
3HAX010000210 Revision: A
for