ABB Feather Duster V2 Product Manual page 161

4
5
Refitting the motor
Use these procedures to refit the motor.
Refitting the motor
1
2
Product manual - Feather Duster V2
3HAX010000210 Revision: A
Action
Remove the pulley hub from the motor.
Remove the adjustable plate from the mo-
tor by removing the screws and washers.
Action
Refit the adjustable plate to the motor.
Refit the pulley hub.
Make sure the key on the motor axis
aligned with the key slot of the pulley hub.
© Copyright 2018 ABB. All rights reserved.
5.2.7 Replacing the motor
Note
xx1800001596
xx1800001597
Note
Screw: M6x12 (4 pcs)
Tightening torque: 10 Nm
xx1800001597
xx1800001596
Continues on next page
5 Repair
Continued
161