ABB Feather Duster V2 Product Manual page 62

3 Installation and commissioning
3.3.3 Installing the Feather Duster V2
Continued
2
3
4
5
Continues on next page
62
Action
Fit the round-slings to the lifting screws at
each side of the frame and to the overhead
crane.
CAUTION
The lifting eye nuts must be fitted to the pos-
itions shown in the figure to balance the
Feather Duster V2 while lifting.
CAUTION
The Feather Duster V2 weighs 120 kg.
All lifting accessories used must be sized
accordingly!
WARNING
Personnel must not, under any circum-
stances, be present under the suspended
load!
Raise the overhead crane to lift the Feather
Duster V2.
© Copyright 2018 ABB. All rights reserved.
Note
xx1800001341
Product manual - Feather Duster V2
3HAX010000210 Revision: A