Table of Contents
Advertisement
3 Installation and commissioning
3.3.4 Connecting exhaust hose and cables
Continued
Routing introduction
After the Feather Duster V2 is correctly installed on the robot, connect external
exhaust hose and electrical cables to make the Feather Duster V2 ready for
operation. The Feather Duster V2 is delivered with internal cabling fitted. To replace
internal cables, see
The electrical cables are combined with the air tube within a protection flexible
conduit. Exhaust hose and conduit are fixed at different locations on the robot to
minimize wearing during operation.
xx1800001591
A
B
C
D
E
F
Continues on next page
68
Replacing the cable chain on page
Exhaust hose
Hose holder
Cabling
Cable clamp
Fixing plate
Support frame
© Copyright 2018 ABB. All rights reserved.
103.
Product manual - Feather Duster V2
3HAX010000210 Revision: A
Advertisement
Table of Contents
