Alarm Lock Trilogy Networx AL-IME2-PIE Installation Instructions Manual
Alarm Lock Trilogy Networx AL-IME2-PIE Installation Instructions Manual

Alarm Lock Trilogy Networx AL-IME2-PIE Installation Instructions Manual

Plug-in expander
Hide thumbs Also See for Trilogy Networx AL-IME2-PIE:

Advertisement

345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
or visit us at
http://tech.napcosecurity.com/
(Note: Technical Service is for security professionals only)
Publicly traded on NASDAQ
Symbol: NSSC
OVERVIEW
The Trilogy Networx
greatly extends the coverage area of version 2 series
Gateways.
The AL-IME2-PIE is a
"plug-in" version of the AL-IME2-EXP
Expander; both models are functional-
ly identical. Installation is simple, with
the AL-IME2-PIE only requiring a con-
nection to a standard 120VAC wall
outlet, .
AL-IME2-PIE Expanders are cost-
effective, require no wiring, and fea-
ture a simplified 'Plug and Play' setup
where the Networx system automati-
cally identifies all newly powered Ex-
panders and quickly determines the
best wireless signal pathways. Up to
7 Expanders can be added to one ver-
sion 2 series Gateway.
Why use AL-IME2-PIE Expanders?

Less costly, Expanders allow large coverage areas
without using additional Gateways

Does not require network access / Ethernet cables

Can be added to existing systems to improve sig-
nal strength in weak signal areas

Allows for greater flexibility when positioning ver-
sion 2 Gateways

Allows large area signal coverage with a single net-
work connection to the Gateway
Note: Expanders are available in two different de-
signs: The AL-IME2-PIE Plug-In Expander and the AL
-IME2-EXP Expander (identical in operation; see
WI2156 for more information).
Version 2
The AL-IME2-PIE " version 2" Expanders (notice the
"2" in the model name) are the next generation of Net-
worx wireless devices.
panders only work with version 2 Gateways, a version
2 Gateway must be installed and operational in your
system for AL-IME2-PIE Expanders to function (AL-
IME2-PIE Expanders cannot communicate with old-
er "non-version 2" Gateways).
Note: Although the version 2 Gateways and AL-
IME2-PIE Expanders CAN be mixed into an existing
system that includes older "non-version 2" Gateways,
NOTICE – Local Regulations in Canada do not permit use of a Mounting Tab. In Canada, do not use the Mounting Tab
to attach the unit to an outlet. Avis – Les réglementations locales au Canada ne permettent pas l'utilisation d'une patte
de montage. Au Canada, il est interdit de raccorder l'appareil à une prise de courant au moyen d'une patte de montage.
AL-IME2-PIE Plug-In Expander
© ALARM LOCK 2018
AL-IME2-PIE Plug-in Expander
AL-IME2-PIE
Because AL-IME2-PIE Ex-
Installation Instructions
at least one new version 2 Gateway must be up and
running before an AL-IME2-PIE Plug-In Expander can
be used.
IMPORTANT: DL-Windows version 5.4.2 or later is
required to support version 2 Gateways and Expanders.
The AL-IME2-PIE Plug-In Expander is compatible with
Alarm Lock and Continental Access products. Refer to
the documentation supplied with your software for inte-
gration details.
AL-IME2-PIE SPECIFICATIONS
NETWORK RANGE
Note: Actual range varies with building construc-
tion.

Gateway/Expander to Locks: Clear field range 500'.

Typical indoor range: Networx 75-175'; ArchiTech
Networx: 50-125'.

Gateway/Expander to Expander: Clear field range
500'. Typical indoor range, 75- 175'.
AL RADIO LINK

902 - 928MHz

13.5mW typical RF power
POWER

Input Voltage: 120VAC @ 60Hz

Peak Supply Current: 10mA

Occupies one 120VAC outlet
ENVIRONMENTAL

Operating Temperature: -20˚ to 60˚C (-4˚ to 140˚F)

Storage Temperature: -40˚ to 85˚C (-40˚ to 185˚F)
PHYSICAL

Enclosure Size: 4.3"H x 2.5"W x 0.875"D, (5"H with
Mounting Tab)

Weight: 0.35lbs.
EXPANDER LOCATION GUIDELINES
Once your version 2 Gateway location has been select-
ed, the next step is to determine where to install Ex-
panders. However, the following must be taken into
consideration:

Although wood and wallboard construction can have
little effect upon signal strength, concrete or brick can
reduce signal strength by up to 35%. Steel-reinforced
concrete or metal lath and plaster can reduce signal
strength as much as 90%!
WI2219BLF 6/18
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Trilogy Networx AL-IME2-PIE and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Alarm Lock Trilogy Networx AL-IME2-PIE

  • Page 1 "plug-in" version of the AL-IME2-EXP The AL-IME2-PIE Plug-In Expander is compatible with Expander; both models are functional- Alarm Lock and Continental Access products. Refer to ly identical. Installation is simple, with the documentation supplied with your software for inte- the AL-IME2-PIE only requiring a con- gration details.
  • Page 2: Installation Configurations

     Generally, depending on construction, the Expanders Gateway centrally located: should be typically mounted within approximately When a single version 2 Gate- 100 feet of the Gateway or another Expander way is located in the center,  Expanders should be typically located within approxi- surrounded by up to 7 Expand- mately 75 feet from the intended wireless lock loca- ers (maximum), this configura-...
  • Page 3 4. Observe the LEDs Upon power up: Mounting Red solid (momentarily)... ● Yellow blinks counting out " Expander Group" ● setting (no blink = zero)... Yellow solid + green rapid flicker ● Next, reset the Expander as follows: 5. Reset the Expander! IMPORTANT: ALWAYS reset the Expander memory, even if the Expander is new "out of the box"...
  • Page 4: A L A R M L O C K L I M I T E D Wa R R A N T Y

    This warranty shall not apply to any equipment, or any In no event shall ALARM LOCK be liable for an amount part thereof, which has been repaired by others, improperly in excess of ALARM LOCK's original selling price of the...
  • Page 5: Federal Communications Commission Interference Statement

    FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 6 Canada, avis d'Industry Canada (IC) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Table of Contents