Customizing The Initial Settings [Custom Setting Mode] - Riso EZ Series User Manual

REG-LL_EN.book Page 66 Wednesday, September 14, 2011 12:03 PM
Advanced Features
Customizing the Initial Settings
[Custom Setting Mode]
You can change the initial settings that are restored when the power is turned on or when the
Changed settings are effective until they are changed again.
The changeable items and their descriptions are as follows:
:Initial setting (factory default)
Important!:
• When "Management ON/OFF"(Item No. 81) is set to "ON", the Custom Setting mode settings are restricted by the
administrator except the items indicated *
The setting of items indicated *
The setting of items indicated *
Item
Changeable Items
No.
01 Print speed
Important!:
• When the "ECO mode" (Item No.
28) is set to "ON", the initial setting
cannot be changed.
02 Print density (For EZ3XX only)
Important!:
• When the "ECO mode" (Item No.
28) is set to "ON", the initial setting
cannot be changed.
03 Auto-Process
Change the default setting for the
"Auto-Process".
04 Scanning level
05 Image Processing mode
Important!:
• With the Photo mode or Duo mode
selected, you cannot select "Auto"
for the scanning level.
06 Size of originals for Book
shadow editing*
"Paper" means the
original is the same size
as the paper loaded on
the Paper Feed Tray.
07 Width of central shadow for Book
shadow editing*
66

Customizing the Initial Settings [Custom Setting Mode]

1 .
can be changed by all users.
1
(Item No. 81-95) can be set if the administrator is registered in "Create User" (Item No. 80).
2
0
1
1
OFF
1
Line
EZ391 Paper
EZ221
1
EZ371 Paper
EZ331
EZ301
EZ231
EZ201
20 mm
1
( 13 / ")
16
Parameter Selection
1 2 3
2 3 4
2 3 4
ON
2 3 4
Photo Duo
Ledger Legal Letter
A3 B4 A4
30 mm 40 mm 50 mm
(1 3 / ") (1 9 / ") (1 31 / ")
16 16 32
key is pressed.
4 5
5
5
5 Auto
B5
80 mm
(3 1 / ")
8