114 Remote IPE maintenance
Once the cause is identified, correct the problem by replacing the defective
card or Fiber Remote Multi-IPE Interface unit, connecting accidentally
disconnected cables, or correcting the system software problem.
Large Systems provide built-in self-diagnostic indicators and software and
hardware tools. These diagnostic facilities simplify system troubleshooting
and reduce mean-time-to-repair (MTTR).
This document focuses on the maintenance of Fiber Remote Multi-IPE
Interface units at both sides of the fiber-optic link. The system installation
and maintenance guide sections of Communication Server 1000M and
Meridian 1 Large System Maintenance (NN43021-700) () describe how to
maintain the entire system.
This section describes how to maintain the Fiber Remote Multi-IPE
Interface unit as an integral part of the local system.
It also describes how to maintain and troubleshoot the Superloop
Network and the Peripheral Controller cards dedicated to the Remote IPE
operation.
Diagnostic tools
Diagnostic tools are used to troubleshoot problems in the system including
problems with the Fiber Remote Multi-IPE Interface unit. When diagnosing
Fiber Remote Multi-IPE Interface unit and Remote IPE problems, it can be
necessary to use more than one of these tools.
Hardware diagnostic tools
Recommended test equipment:
•
•
•
•
•
•
•
Optional equipment:
•
•
Copyright © 2007-2009 Nortel Networks
.
optical power meter (Fotec Model M712A or equivalent)
fiber-optic tracer (low power visible light source)
adjustable optical attenuator
fiber-optic patchcords and adapters (matching type of fiber and
connectors for the single-mode and multi-mode fibers)
inspection microscope
pure isopropyl alcohol lint-free wipes
aerosol duster
1300 nm light source (LED or laser)
visual fault locator (high power visible light source)
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 03.01
11 May 2009