Using Tcp/Ip Diagnostic Tools - Nortel CallPilot User Manual

5
6

Using TCP/IP diagnostic tools

This section describes the following TCP/IP diagnostic tools that are
available for the network adapter:
•
•
•
•
•
•
These utilities help you to verify network connectivity, test the network
interface, and isolate any configuration problems.
The ipconfig command
The ipconfig command displays IP configuration information.
ipconfig default
If you run the command without flags, it displays the IP address, subnet
mask, and default gateway for each adapter bound to TCP/IP.
ipconfig command syntax
The ipconfig command uses the following syntax:
ipconfig /[ ]
The following flags are available for the ipconfig command.
ipconfig command extensions
Flag
/?
/all
/release
/renew
Copyright © 2007, Nortel Networks
.
Click OK.
Result: The Event Properties dialog box disappears.
Click File > Exit.
Result: The Event Viewer closes.
ipconfig
ping
tracert
arp
nbtstat
netstat
Description
Displays Help information.
Displays full configuration information.
Releases the IP address for the specified adapter.
Renews the IP address for the specified adapter.
Nortel CallPilot
1005r Server Maintenance and Diagnostics
NN44200-704 01.06 Standard
5.0 19 July 2007
Using TCP/IP diagnostic tools 31
—End—