Viewing The Last Diagnostic Results - Nortel CallPilot 201i Installation And Configuration Manual

Using CallPilot Manager to monitor hardware

Viewing the last diagnostic results

Introduction
You can review the results of previously run diagnostics by clicking the Get
Last Results button for a component.
To view the last diagnostics result
ATTENTION
1 In CallPilot Manager, click Maintenance
Result: The Maintenance page appears.
2 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
3 Continue clicking the plus sign (+) until the component with which you
want to work is visible.
4 Click the hardware component for which you want to run diagnostics.
Result: The Maintenance page refreshes to show details about the
component.
96
Nortel Networks recommends that you courtesy stop rather
than stop a component if possible. For instructions, see
"Starting and stopping components" on page 87.
Maintenance Admin.
Standard 1.0
CallPilot