Diagnostic Error Messages - Nortel Communication Server 1000 Manual

CNTL (NO) YES
CNTR 0- 255
(CRT)
(TMT)
(SCT)
Table 81
Alarm condition thresholds
Alarm Mnemonic
TBF
FAE
HER
TSF
AIS
LOI
DAI

Diagnostic error messages

The error messages shown in
175)
184)
Digital Trunk Maintenance (DTM) error messages (LD 75)
The DTM messages indicate problems with digital trunks detected by the
Digital Trunk Maintenance program (LD 75).
Table 82
DTM error messages
Code Description
DTM000 Program Identifier
DTM001 Too many characters
DTM002 Invalid character input
DTM003 Invalid command
DTM004 Wrong number of parameters
DTM005 Invalid parameter
Copyright © 2007, Nortel Networks
.
Display the following prompts
Only prompted if CNTL = YES. Enter the desired threshold
for one of the three counters in the range 0-254.
If 255 is entered, the threshold is set to infinity.
The defaults are:
CRT (channel reset threshold) 120
TMT (test message threshold) 50
SCT (stop count threshold) 20
PP
0-15 secs (5)
0-15 secs (2)
0-15 mins (1)
0-15 secs (0)
0-15 mins (1)
0-15 secs (0)
1-15 mins (1)
through Table 89 "Clock controller status and error messages" (page
are issued for diagnostic alarms.
Nortel Communication Server 1000
DASS2 Fundamentals
NN43001-571 02.01 Standard
Release 5.5 7 December 2007
Diagnostic error messages 175
MM
0-24 hrs (0)
0-24 hrs (1)
0-24 hrs (1)
0-24 hrs (0)
0-24 hrs (1)
0-24 hrs (0)
0-24 hrs (1)
Table 82 "DTM error messages" (page
Action
Check input and re-enter
Check input and re-enter
Check input and re-enter
Check input and re-enter
Check input and re-enter
CC
0-15 (1)
0-15 (4)
0-15 (10)
0-15 (0)
0-15 (4)
0-15 (0)
0-15 (5)