Configuration Updates; Automatic Configuration Update; Copy Configuration To Scanner; Copy Configuration To Base Station - Datalogic PowerScan PBT950X Product Reference Manual

See page 302
these features.

Automatic Configuration Update

When this feature is enabled, a reader and its linked Base Station can auto-
matically ensure they stay in sync with regard to application hardware and/
or configuration. See
Automatic Configuration Update = Enable

Copy Configuration to Scanner

Scan the following label to copy the current Base Station configuration to the
scanner. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on
the scanner.

Copy Configuration to Base Station

Scan the following label to copy the current scanner configuration to the
Base Station. Use this method when the Auto Configuration Update feature
is disabled and you want a one-time configuration update to be performed
on the Base Station.
Product Reference Guide

CONFIGURATION UPDATES

in "References" for detailed information and examples of
page 302
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Copy Configuration to Scanner
Copy Configuration to Base Station
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this bar
code.
Enter/Exit Programming Mode
for more information on this feature.
Automatic Configuration Update = Disable
DEFAULT
213