Configuration Updates; Automatic Configuration Update; Copy Configuration To Reader; Copy Configuration To Base Station - Datalogic Gryphon 2D Series Reference Manual

CONFIGURATION UPDATES

Automatic Configuration Update

When this feature is enabled, a reader and its linked Base Station can automatically
ensure they stay in sync with regard to application hardware and/or configuration. See
page 291
$CBTCU00

Automatic Configuration Update = Enable

Copy Configuration to Reader

Scan the following label to copy the current Base Station configuration to the reader.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the reader.

Copy Configuration to Base Station

Scan the following label to copy the current reader configuration to the Base Station.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the Base Station.
CONFIGURATION UPDATES
for more information on this feature.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Copy Configuration to Reader
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Copy Configuration to Base Station
ENTER/EXIT PROGRAMMING MODE
Automatic Configuration Update = Disable
$CBTCU01
PRODUCT REFERENCE GUIDE
247