ENTER/EXIT PROGRAMMING MODE
Automatic Configuration Update
When this feature is enabled, a reader and its linked Base Station can automatically
ensure they stay in sync with regard to application hardware and/or configuration. See
page 339
$CBTCU00
Automatic Configuration Update = Enable
Copy Configuration to Reader
Scan the following label to copy the current Base Station configuration to the reader.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the reader.
Copy Configuration to Base Station
Scan the following label to copy the current reader configuration to the Base Station.
Use this method when the Auto Configuration Update feature is disabled and you want
a one-time configuration update to be performed on the Base Station.
288
POWERSCAN™ PD/PM/PBT9600
CONFIGURATION UPDATES
for more information on this feature.
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Copy Configuration to Reader
NOTE: Do not scan an ENTER/EXIT PROGRAMMING MODE label in conjunc-
tion with this bar code.
Copy Configuration to Base Station
Automatic Configuration Update = Disable
$CBTCU01
WIRELESS FEATURES