Toyota COROLLA CROSS HYBRID 2020 Owner's Manual page 296

294
5-9. Bluetooth
number and returns to the previous
screen.
Pressing
and go to "Enter a number" screen.
Phone number containing a "p"

symbol
When the "p" symbol is dialed in an
outgoing call, there will be a pause
for 2 seconds before the following
digits are dialed automatically.
Phone number containing a "w"

symbol
When the "w" symbol is dialed in an
outgoing call, you need to press
(SEND) again to dial following
digits.
This operation can be performed
while driving.
Adjusting the outgoing vol-
ume
Your voice volume that the other
party hears from their speaker can
be adjusted.
1
Press
2
Use the "TUNE•SELECT" knob
to adjust the volume. (-5 to +5)
Setting call volume
To decrease the volume: Turn the
"POWER VOLUME" knob
counterclockwise.
To increase the volume: Turn the
"POWER VOLUME" knob clock-
wise.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
®
Phone
(EXIT) deletes the number
(Send vol)
■
When talking on the phone
●
Do not talk simultaneously with the
other party.
●
Keep the volume of the received voice
down. Otherwise, voice echo will
increase.
■
Automatic volume adjustment
When vehicle speed is 80 km/h (50
mph) or more, the volume automatically
increases. The volume returns to the
previous volume setting when vehicle
speed drops to 70 km/h (43 mph) or
less.
■
Phone call system functions
Depending on the cellular phone, certain
functions may not be available.
■
Situations where the system may
not recognize your voice
●
When driving on a rough road
●
When driving at high speeds
●
When air is blowing out of the vents
onto the microphone
●
When the air conditioning fans emits a
loud noise