Table of Contents
Advertisement
in the table above. For kind of "fixture" relation, confirm the following table.
If your child restraint system has no kind of "fixture" (or if you cannot find
information in the table below), please refer to the child restraint system
"vehicle list" for compatibility information or ask the retailer of your child
seat.
Fixture
F3
F2
F2X
R3
R2
R2X
R1
L1
L2
B2
B3
When securing some types of child
restraint systems in rear seat, it
may not be possible to properly use
the seat belts in positions next to
the child restraint without interfering
with it or affecting seat belt effec-
tiveness. Be sure your seat belt fits
snugly across your shoulder and
low on your hips. If it does not, or if
it interferes with the child restraint,
move to a different position. Failure
to do so may result in death or seri-
ous injury.
When installing a child restraint
in the rear seats, adjust the front
seat so that it does not interfere
with the child or child restraint
system.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
Full-height, forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Reduced-height forward-facing child restraint systems
Full-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Reduced-size, rearward-facing child restraint systems
Rearward-facing infant seat
Left lateral-facing (carrycot) infant seat
Right lateral-facing (carrycot) infant seat
Junior seat
Junior seat
1-2. Child safety
Description
When installing a child seat with
support base, if the child seat
interferes with the seatback
when latching it into the support
base, adjust the seatback rear-
ward until there is no interfer-
ence.
If the seat belt shoulder anchor is
ahead of the child seat belt
guide, move the seat cushion
forward.
53
1
Advertisement
Table of Contents
