Table of Contents
Advertisement
Installing tire pressure warn-
ing valves and transmitters
When replacing tires or wheels, tire
pressure warning valves and trans-
mitters must also be installed.
When new tire pressure warning
valves and transmitters are
installed, new ID codes must be
registered in the tire pressure warn-
ing computer and the tire pressure
warning system must be initialized.
Have tire pressure warning valves
and transmitter ID codes regis-
tered by your Toyota dealer.
(P.349)
■
Replacing tires and wheels
If the ID code of the tire pressure warn-
ing valve and transmitter is not regis-
tered, the tire pressure warning system
will not work properly. After driving for
about 10 minutes, the tire pressure
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
7-3. Do-it-yourself maintenance
warning light blinks for 1 minute and
stays on to indicate a system malfunc-
tion.
NOTICE
■
Repairing or replacing tires,
wheels, tire pressure warning
valves, transmitters and tire
valve caps
●
When removing or fitting the
wheels, tires or the tire pressure
warning valves and transmitters,
contact your Toyota dealer as the
tire pressure warning valves and
transmitters may be damaged if not
handled correctly.
●
Make sure to install the tire valve
caps. If the tire valve caps are not
installed, water could enter the tire
pressure warning valves and the
tire pressure warning valves could
be bound.
●
When replacing tire valve caps, do
not use tire valve caps other than
those specified. The cap may
become stuck.
347
7
Advertisement
Table of Contents
