Wheels - Toyota COROLLA CROSS HYBRID 2020 Owner's Manual

NOTICE
■
When inspecting and adjusting
tire inflation pressure
Be sure to put the tire valve caps back
on.
If a valve cap is not installed, dirt or
moisture may get into the valve and
cause an air leak, resulting in
decreased tire inflation pressure.
COROLLA CROSS HYBRID_Kouzui_GE
COROLLA CROSS HYBRID_OM_General_OM16537E
7-3. Do-it-yourself maintenance

Wheels

If a wheel is bent, cracked or
heavily corroded, it should be
replaced. Otherwise, the tire
may separate from the wheel
or cause a loss of handling
control.
Wheel selection
When replacing wheels, care
should be taken to ensure that they
are equivalent to those removed in
load capacity, diameter, rim width
*
and inset .
Replacement wheels are available
at your Toyota dealer.
*
: Conventionally referred to as offset.
Toyota does not recommend using
the following:
 Wheels of different sizes or types
 Used wheels
 Bent wheels that have been
straightened
■
When replacing wheels
The wheels of your vehicle are equipped
with tire pressure warning valves and
transmitters that allow the tire pressure
warning system to provide advance
warning in the event of a loss in tire
inflation pressure. Whenever wheels are
replaced, the tire pressure warning
valves and transmitters must be
installed. (P.347)
351
7